TheGigRig.com Power Supply Solutions

TheGigRig USA Power Supply Solutions Shop

The Gig Rig Modular Power Supply Base Pack-1
The perfect starter pack for the small board
Dan Says -"If you use up to 6 standard 9V pedals, then the Modular Power Supply Base Pack-1 is the perfect place to start. "
In stock now
Click here for more info...
Price: $159.00

The Gig Rig Modular Power Supply Base Pack-2
The power system for the serious pedal board
Dan Says -"If you use up to 11 pedals, then the Modular Power Supply Base Pack-2 is what you need. "
In stock now
Click here for more info...
Price: $189.00

The Gig Rig GENERATOR
The last 9V power supply you'll ever need.
Dan Says -"Never underestimate how important good quality dc power is to get the most out of your pedals. The GENERATOR really delivers the goods"
In stock now
Click here for more info...
Price: $129.00

The Gig Rig Distributor
Daisy chains are now obsolete thanks to the amazing Distributor.
Dan says "Lose that tangle of power leads and custom wire your pedal board in minutes."
each Distributor comes with 6 Distributor cables that can be used over and over again
click here for more info...

In Stock Now
Price: $39.00

Distributor Double
Need more than 6 DC outlets? The Distributor double will handle up to 11!

Dan says -" If you have a large MIDI-8 board, or a Pro-14 that uses 10 standard 9V pedals, then the Distributor double will allow you to wire the perfect pedal power solution in minutes"
n Stock Now
Price: $69.00

Distributor Triple
For the MEGA pedal board. Up to 16 DC outputs when linking the three Distributors.

Dan says -"if you use a Pro-14 with pedals that require 18V from two virtual Batterries and use more than one pedal in any loop, the Distributaor Triple will make sure that each of the pedals is getting exactly the current it needs to sound its best"
n Stock Now

Price: $99.00

Extra Distributor Cables
Need more cables for your Distributor? This is a 6 pack of cables made specificaly for the Distributor. Please note that these are the ONLY cables to use with you Distributor.
In Stock Now
Price: $15.00

Virtual Battery VB-BC (battery clip)
Our very own Virtual Battery. Reduces Noise and improves tone.
Dan says "If you have vintage effects that need batteries to operate, or modern effects that simply need an isolated 9V supply, then the Virtual Battery will solve all your problems"
...click here for more info
Price: $39.00

Virtual Battery VB-DC (2.1 mm center neg DC connector)
Our very own Virtual Battery. Reduces Noise and improves tone.
Dan says "If you have vintage effects that need batteries to operate, or modern effects that simply need an isolated 9V supply, then the Virtual Battery will solve all your problems"
...click here for more info
Price: $39.00

Virtual Battery Double
Buy 2 Virtual Batteries and save yourself a bit of cash!
Price: $69.00

Choose 1 of these combinations
click the drop down menu

Virtual Battery triple
Buy 3 and save even more!
Price: $99.00

Choose 1 of these combinations
click the drop down menu

EvenFlo - Eventide Stombox series adapter
Specifically designed to power the Eventide TimeFactor and StompBox range of pedals, the EvenFlo adapter isolates the supply and coupled with the Generator delivers a very clean isolated high current for this pedal. Plug it in and power your new pedal direct form the Generator along with all your other pedals.
In stock now!

Price: $69.00

SupaNova 9-12V DC Adapter
Our specially designed 9-12V DC adapter for the Nova and T-Rex range of pedals or any pedal requiring a high current isolated 12V dc supply. Plug it in and power your new pedal direct form the Generator. The 9-12V DC adapter is capable of delivering a very high amount of current which is perfect for the modern power hungry 12V DC pedals. It is also completely isolated.
In stock now!

Price: $65.00

El Paso 9-15V DC adapter
The El Paso is converts the 9V from the generator into 15V delvering a high current isolated source for your 15V pedals. Perfect for HiWatt Custome Tape Echo or any other pedal that needs 15V DC. Plug it in and power your new pedal direct form the Generator along with all your other pedals.
In Stock Now
Price: $69.00

Doubler 9-18V DC adapter
The Doubler is a fantastic 9-18V dc converter which means anythng that needs 18V from your old Electric Mistress to your AD80 anaolag delay is now easy to power straight from your generator. The isolation means that you will get no earth hum from other pedals. With one Generator you can now power your entire board.
In Stock Now

Price: $69.00

Electro Man 9-24 DC Adapter
Finaly you can power your old EH 24V pedals from the same supply as your other pedals. The ElectroMan 9-24V adadpter delivers 24V of isolated high current power so powering your Memory Man is now a doddle.
In stock now!

Price: $69.00

Line 6 Adapter
If you use a DL4 or any other LINE6 modelling pedal in this range the LINE 6 Adapter will allow you to run it from your Generator. All you need to do is put this adapter on the end of one of your Distributor cables and plug it in to your Line 6 modelling pedal or Digitech RP100 series pedal and your good to go.
Price: $6.99

2.1mm to Mini Jack Adapter
If you use a pedal that requires a Mini Jack d.c. inout then this is the answer. Just pop it on the end of one of the DItributor cables if you're usinga TS-808, or on the end of one of our adapters if you need it for something a bit special. If you are using an old 18V Electirc Mistress for example, just put it on the end of one of our Doubler 9-18V adapters and plug straigh into the Mistress.
Price: $6.99

2.1mm to Reverse Polarity
A simple 2.1mm reverse polarity adapter, so if it goes in centre negative, it comes out centre positive.
Price: $6.99

2.1mm to 2.5mm adapter
Some pedals use a 2.5mm d.c. input is opposed to a normal BOSS style 2.1mm. Why? Who knows, its an eternal mystery. But now it's no longer a problem.
Back in stock 12th May
Price: $6.99

click here to go back to catalogue page