WET/ DRY MACHING - OUTPUT SIGNAL CONTROLLER
Running more than one amp or output should sound incredible. Too often, it doesn’t.
Phase issues. Ground noise. Level imbalance, And no easy way to actually control what’s going where?
Wet/Dry Machine fixes that.
It’s a professional output signal controller designed to take your signal and send it exactly where it needs to go, cleanly, in phase, and under complete control.
Whether you’re running wet/dry, wet/dry/wet, dual amps or feeding front-of-house, this gives you a solid, reliable way to do it properly.
No noise. No phase problems. No guesswork.
WHY WET/DRY MACHINE?
Do multi-amp and multi-output rigs properly
Running more than one amp should sound huge.
Too often, it doesn’t.
You plug everything in and suddenly you’re dealing with hum, phase issues, thin tone, or just a setup that doesn’t behave the way you expect.
Wet/Dry Machine is designed to solve that.
It’s a professional output signal controller that takes your signal and sends it exactly where it needs to go , cleanly, in phase, and without noise.
Whether you’re running a simple dual-amp setup, a full wet/dry/wet rig, or splitting your signal between amps and front-of-house, Wet/Dry Machine gives you a reliable way to do it properly.
Each output is designed for real-world use, with the tools you actually need to make things work: phase correction, ground lift and isolation where it matters. So instead of fighting your rig, everything just sits where it should, full, clear and in phase.
One of the key parts of the design is the transformer-less isolation system, which keeps your signal intact without the tonal compromises that can come with traditional transformer-based solutions.
It’s also designed to integrate seamlessly with Guitar Tech.
Where Guitar Tech manages everything going into your rig, Wet/Dry Machine takes care of everything coming out.
Together, they give you complete control over your signal path, from input to output, in a way that’s simple, reliable and built for real-world use.
If you’ve ever struggled to get a multi-amp setup sounding right, this is the piece that makes it all make sense.
Up to 4 fully configurable outputs
Take your signal and route it to multiple destinations: Amps, Pedalboards, Front-of-house, Recording interfaces
Build proper wet/dry or multi-output rigs without compromise.
KEY FEATURES
Transformer-less isolation (no tone loss)
Traditional isolation transformers can:
-
Colour your tone
-
Roll off low end
-
Shift phase
Wet/Dry Machine uses TheGigRig’s transformer-less isolation system to keep your signal intact.
No tone loss. No compromise.
Phase-correct, noise-free operation
Each output is designed to work properly in real-world rigs:
-
Phase alignment where it matters
-
Ground lift to eliminate hum
-
Isolation where needed
So everything stays full, punchy and in phase.
Balanced signal path
Designed to integrate with modern rigs:
-
Works perfectly with balanced signals
-
Ideal for FOH and studio setups
-
Maximum noise rejection
Simple, practical control
No menus. No confusion.
Just clear, immediate control over:
-
Where your signal goes
-
How it gets there
-
And how it behaves when it arrives
Designed to work with Guitar Tech
Pair it with Guitar Tech and you’ve got full control over inputs, full control over outputs creating one complete, professional system. Together, they form a powerful hub for complex stage and studio rigs.
Half-rack format (modular system)
-
Compact, professional footprint
-
Joins directly with Guitar Tech via connector plate
-
Optional rack mounting available meaning they are built to scale with your rig.
REAL WORLD USE
-
Wet/dry and wet/dry/wet rigs
-
Running multiple amps cleanly
-
Sending signal to amp + FOH simultaneously
-
Studio routing and re-amping setups
-
Noise-free signal splitting on stage
-
Building scalable, modular rigs
FAQs
Do I really need this for a wet/dry or dual amp setup?
While there are other ways to do it, the Wet/Dry Machine makes it so easy side stepping a lot of issues in other common WDW setups. Without proper phase control, isolation and grounding, multi-amp rigs often sound thin, noisy or inconsistent. Wet/Dry Machine solves those problems so everything stays full and in phase.
Will this introduce any tone loss like some splitters do?
No. Wet/Dry Machine uses a transformer-less isolation system designed to preserve your full signal without the colouration or low-end loss you can get from traditional transformer-based designs.
Can I use this with front-of-house or recording setups?
Absolutely. It’s ideal for sending your signal to FOH, interfaces or additional amps at the same time. The balanced signal handling, isolation and ground lift options make it reliable in both live and studio environments.
Where does Wet/Dry Machine sit in a G3 rig?
Wet/Dry Machine sits after your G3, at the output stage.
G3 handles your pedals and switching.
Wet/Dry Machine takes that signal and distributes it to multiple destinations, amps, wet/dry rigs, or front-of-house properly, and without noise or phase issues.
Can G3 control Wet/Dry Machine as well?
Yes, like Guitar Tech, Wet/Dry Machine can be integrated into a MIDI-controlled rig, so your G3 presets can define not just your effects, but also where your signal is being sent.
This is where things get powerful, your entire rig, from input to output, can change with a single switch.
