WHY REMOTE LOOPY 2?
Have you ever wondered how to get your modulation and delay effects in your amp's loop WITHOUT those massive tone-sucking cable runs?
Do you want your effects back at the amp, but have the ability to switch them out front with a simple footswitch?
We have the answer – Remote Loopy 2 enables you to set up the effects in your amp's FX loop and control them remotely from anywhere on the stage.
The Remote Loopy 2 uses high quality audio relays to facilitate the switching of the 2 true bypass effects loops. The trigger in the Remote Loopy 2 can be activated by any latching switch and as there is no audio in the trigger cable, it can be as long as you like with absolutely no effect on the audio quality. No guitar signals pass through the long control cable to the footswitch so your tone is preserved and your pedals are out of the way and close to your amp. It's the ultimate, silent, dual effects loop remote switching system. Use it with pedals, rack gear – anything you want in your amp's loop!
KEY FEATURES
Silent Switching
TheGigRig Remote Loopy 2 enables you to switch effects pedals silently in and out of your amplifier's effects loop
A Tidier Stage
Leave your effects back at the amp with just a small switch out front. Safer from spills and damage, and saves space in small venues
Tone Preserving
There is no audio between the Remote Loopy2 and the footswitch, so the connection can be as long as you like with NO tone-suck or signal loss
Reliable
Gold contact relay switching, the Remote Loopy2 is rugged, road tested, and as reliable as they come
WHAT THEY SAY
...first thing in the whole signal chain is a Remote Loopy 2, GigRig are great, love them...
Ian Sheppard - Guitar Tech
RED HOT CHILI PEPPERS
QUICKTECH
MANUAL
POWER
9V (optimised for use with the GigRig Generator power supply)
CURRENT DRAW
120mA
SWITCHING
Gold contact audio relays remotely switched via TRS connection
DIMENSIONS
12.3cm x 6.5cm x 3.6cm / 4.84in x 2.56in x 1.42in
WEIGHT
0.22kg / 0.5lbs
FAQs
What would I use the Remote Loopy 2 for?
There are a number of uses. For example let's say you have delay and modulation units that you like to use in your amp's effects loop... but you don't want to run long cables to the front of the stage for either tonal and/or practical reasons. You can use short signal cables and leave the delay and modulation units near your amp but switch them on and off using Remote Loopy 2 on stage.
Remote Loopy 2 can also be used in conjunction with G2 to add 2 extra loops and be switched automatically by G2.
What footswitch do I need to use with the Remote Loopy 2?
Our recommended switch is the GigRig Duo dual footswitch. However, any dual-latching remote switch or footswitch will work. Requires TRS connection for Remote Loopy 2.
