
WHY PLUS2?
Using a simple TRS connector, you can effortlessly toggle between PLUS2’s two effects loops. Connect a TRS cable from your pedalboard’s Remote Switch output to PLUS2’s Remote In, and gain two extra loops programmable within your preset
Leveraging QMX technology, PLUS2 delivers unmatched audio quality with truly lossless effects loops, eliminating the need for buffering. This means you can connect any effect—including vintage fuzzes and treble boosters—without any coloration or loading.
Compact and efficient, PLUS2 is our smallest remote loop switcher yet, freeing up valuable space on your rig for your pedals.
KEY FEATURES
-
Can add 2 more programable effects loop to any rig or pedalboard
-
Switch the loops using either TRS remote switch or MIDI including PC and CC message
-
Passive true bypass loops so you can put anything in them
TECHNICAL
MANUAL
Power: 9V DC 2.1mm centre negative
Current Draw: 60mA
Dimensions:
Length: 8cm/ 3.15"
Width: 5.9cm/ 2.32"
Height: 4.15cm / 1.63"
Weight: 0.171kg/ 0.38lb

FAQs
How do I power the PLUS2?
The PLUS2 needs at least 60mA @9v’s
Is the PLUS2 mono or stereo?
The PLUS2 is a purely mono switching system
How do I control the PLUS2?
The PLUS2 can be controlled via a TRS cable connected to a dual latching FootSwitch, such as the LATCHMO X 2. Alternatively, it can be controlled via the remote switches on the G2/G3/G3 Atom.
The PLUS2 cannot be controlled via MIDI
Can I re-order the loops on the PLUS2?
No, you cannot re-order the PLUS2's Loops
How do I add the PLUS2 to my G2/G3/G3 Atom?
You can add the PLUS2 to a few different positions in your G2’s/G3’s/G3 Atom’s signal chain:
You could place the PLUS2 before your G2/G3/G3 Atom: .
Guitar - PLUS2 Input .
PLUS2 Output - G2/G3/Atom Input
Or
You could place a PLUS2 inside one of the G2/G3/Atom's Loops: .
Guitar - G2/G3/Atom Input
Loop 3 (E.G.) Send - PLUS2 Input
. PLUS2 Output - Loop 3 Return
Or
After G2/G3/Atom via one of G2/G3/Atom's Output's
Guitar - G2/G3/G3 Atom input
G2/G3/G3 Atom - Output 1 - PLUS2 Input
PLUS2 Output - Amp Input
You’ll then need to connect TRS/Stereo cable between the ‘RMT’ jack socket on the PLUS2 and one of the remote switch sockets on you G2/G3/G3 Atom.
You’ll then program the PLUS2’s Loops using the remote switch buttons/function of the G2/G3/G3 Atom